#Iei command keypad code
#Iei command keypad series

This can be used to turn on accessories such as lights, CCTV camera, or notify a guard.

#Iei command keypad series

KEYPAD ACTIVE OUTPUT The Command and Control Series Door-Gards can be programmed to energize a voltage output whenever a key is touched. This can be turned off through programming. KEYPRESS FEEDBACK / AUDIBLE KEYPRESS The Command and Control Series Door-Gards will acknowledge a keypress by momentarily illuminating the yellow LED like on the indoor(i), or momentarily sounding the sounder like in the sealed environmental(se) style. This feature is especially useful when controlling an electric locking device. The main relay (if selected) will energize for the same time period as the Master Code. Upon a momentary closure, the selected outputs will energize for their programmed time. REMOTE TRIGGERING INPUT (REX) This normally open loop that by default operates the Main Relay upon activation and can be programmed to trigger any combination of outputs. The Ruggedized(r), Sealed Environmental(se), Multipad and Xtreme style provide these outputs in the form of 1 Amp Form-C relays, all other styles have negative voltage outputs with a 50mA sink. AUXILIARY OUTPUTS Auxiliary outputs can be individually timed from 1 to 90 seconds or act as a toggle switch, and may be triggered individually or in combination-by code. MAIN RELAY This is an 8 Amp (10 Amp surge) Form-C relay which can be toggled or timed from 1 to 90 seconds-by code.

#Iei command keypad code

The Master Code is always assigned to user location one (1).

Codes may be from 1-6 digits in length and digits may be repeated. CODES The Door-Gard Command and Control keypads allow up to 120 individual user codes to be valid. LED or Sounder guidance makes programming easy, and changing codes a matter of seconds for an authorized user. PROGRAMMING All programming is accomplished entirely from the front of the keypad. FEATURES: 4 INDEPENDENT OUTPUTS 4 INDEPENDENT TIMERS ALL OUTPUTS ASSIGNABLE BY CODE ON BOARD 8 AMP FORM C RELAY 120 USERS REMOTE TRIGGERING INPUT KEYPAD PROGRAMMABLE MEMORY Non-volatile EEPROM memory means your codes and instructions will be there whether you remove power for 5 minutes or 5 years. Door-Gards accept power from a 12 or 24V AC/DC Supply. Designed for individual control of up to four devices, Door-Gard Command and Control Series keypads are the perfect choice for controlling electric locking devices, security systems, automatic operators or machinery. 1 FEATURES AND PROGRAMMING GUIDE COMMANDANDCONTROLSERIES DOOR-GARD COMMAND AND CONTROL SERIESkeypads offer field proven reliability and cost effective solutions anywhere limited control or access is desired.